3D Bioprinting
Modeling In Vitro Tissues and Organs Using Tissue-Specific Bioinks
(Sprache: Englisch)
This text advances fundamental knowledge in modeling in vitro tissues/organs as an alternative to 2D cell culture and animal testing. Prior to engineering in vitro tissues/organs,the descriptions of prerequisites (from pre-processing to post-processing) in...
Voraussichtlich lieferbar in 3 Tag(en)
versandkostenfrei
Buch (Kartoniert)
Fr. 71.00
inkl. MwSt.
- Kreditkarte, Paypal, Rechnungskauf
- 30 Tage Widerrufsrecht
Produktdetails
Produktinformationen zu „3D Bioprinting “
Klappentext zu „3D Bioprinting “
This text advances fundamental knowledge in modeling in vitro tissues/organs as an alternative to 2D cell culture and animal testing. Prior to engineering in vitro tissues/organs,the descriptions of prerequisites (from pre-processing to post-processing) in modeling in vitro tissues/organs are discussed. The most prevalent technologies that have been widely used for establishing the in vitro tissue/organ models are also described, including transwell, cell spheroids/sheets, organoids, and microfluidic-based chips. In particular, the authors focus on 3D bioprinting in vitro tissue/organ models using tissue-specific bioinks. Several representative bioprinting methods and conventional bioinks are introduced. As a bioink source, decellularized extracellular matrix (dECM) are importantly covered, including decellularization methods, evaluation methods for demonstrating successful decellularization, and material safety. Taken together, the authors delineate various application examples of 3Dbioprinted in vitro tissue/organ models especially using dECM bioinks. Inhaltsverzeichnis zu „3D Bioprinting “
Introduction.- Definition, necessity, and prerequisites for modeling 3D tissues and organs.- Prevalent technologies for in vitro tissue/organ biofabrication.- 3D cell printing techniques.- Decellularized extracellular matrix-based bioinks.- Skin.- Blood vessels.- Liver.- Kidney.- Cardiac.- Airway.- Brain.- Muscle.- Conclusion and future perspectiveAutoren-Porträt von Dong-Woo Cho, Byoung Soo Kim, Jinah Jang, Ge Gao, Wonil Han, Narendra K. Singh
Prof. Dong-Woo Cho received his Ph.D. in Mechanical Engineering from the University of Wisconsin-Madison in 1986. Ever since, he has been a professor in the Department of Mechanical Engineering at the Pohang University of Science and Technology. He is the director of the Center for Rapid Prototyping-based 3D Tissue/Organ Printing. His research interests include 3D microfabrication based on 3D printing technology, and its application to tissue engineering and more generally to bio-related fabrication. He has recently focused his attention on tissue/organ printing technology and development of high-performance bioinks. He serves or has served on the editorial boards of 11 international journals. He has published over 280 academic papers in various international journals in manufacturing and tissue engineering and has contributed chapters to ten books as well as writing a textbook related to tissue engineering and organ printing. He has received many prestigious awards including "the mystery of life" award at The Roman Catholic Archdiocese of Seoul (2018, January) and "the respect life" award from LINA Foundation 50+ awards (2019, April). He was also awarded the Nam-Go chair professorship at POSTECH.Prof. Jinah Jang received her Ph.D. at the Division of Integrative Biosciences and Biotechnology at POSTECH in 2015, and she worked as postdoctoral fellow in the Department of Mechanical Engineering at POSTECH (2015-2016) and the Institute for Stem Cell and Regenerative Medicine/Department of Pathology and Bioengineering at the University of Washington (2016-2017). She joined POSTECH in the spring of 2017 as an assistant professor in creative IT engineering. Her research focuses on the building the functional human tissues from stem cells via 3D bioprinting technology and printable biomaterials, particularly based on tissue-specific bioinks. Her successful achievements may lead to clinical applications for providing advanced therapeutic methods,
... mehr
understanding disease mechanisms, and engineering micro-tissue models.
Dr. Byoung Soo Kim received his Ph.D. in Mechanical Engineering from POSTECH in 2019. During an MS and PhD integrated program at the Department of Mechanical Engineering in POSTECH under the guidance of Prof. Dong-Woo Cho, his research focused on 3D printing system development, dECM-based bioink formulation, and in vitro tissue biofabrication. He is particularly focused on 3D cell printing of in vitro human skin models. He has suggested a novel platform for matured 3D skin constructs by employing a printable functional transwell system, rather than using commercial transwell inserts. Furthermore, he formulated a porcine-skin-derived tissue-specific bioink and applied it to skin tissue engineering. A vascularized and perfusable human skin equivalent composed of an epidermis, dermis, and hypodermis was 3D cell-printed and matured. Based on his previous achievements, heis now working on in vitro skin disease modeling for better pathophysiological studies.
Dr. Ge Gao received his master's degree from Huazhong University of Science and Technology (HUST) and his Bachelor's degree from Harbin Institute of Technology (HIT), majoring in Materials Science. Since 2014, he has been a Ph.D. student at the Department of Mechanical Engineering at POSTECH. His current research focuses on 3D cell-printing of vascular constructs and their applications as in vitro vascular platforms and in vivo blood vessel bypass grafts. In addition, he also developed a vascular-tissue-specific bioink that can facilitate the functionalization of the fabricated vascular equivalents. These achievements might be useful for a wide range of biomedical applications, from modeling blood vessel relevant diseases to building vascularized tissues/organs.
Mr. Wonil Han received his bachelor's degree in Life Science from Handong Gl
Dr. Byoung Soo Kim received his Ph.D. in Mechanical Engineering from POSTECH in 2019. During an MS and PhD integrated program at the Department of Mechanical Engineering in POSTECH under the guidance of Prof. Dong-Woo Cho, his research focused on 3D printing system development, dECM-based bioink formulation, and in vitro tissue biofabrication. He is particularly focused on 3D cell printing of in vitro human skin models. He has suggested a novel platform for matured 3D skin constructs by employing a printable functional transwell system, rather than using commercial transwell inserts. Furthermore, he formulated a porcine-skin-derived tissue-specific bioink and applied it to skin tissue engineering. A vascularized and perfusable human skin equivalent composed of an epidermis, dermis, and hypodermis was 3D cell-printed and matured. Based on his previous achievements, heis now working on in vitro skin disease modeling for better pathophysiological studies.
Dr. Ge Gao received his master's degree from Huazhong University of Science and Technology (HUST) and his Bachelor's degree from Harbin Institute of Technology (HIT), majoring in Materials Science. Since 2014, he has been a Ph.D. student at the Department of Mechanical Engineering at POSTECH. His current research focuses on 3D cell-printing of vascular constructs and their applications as in vitro vascular platforms and in vivo blood vessel bypass grafts. In addition, he also developed a vascular-tissue-specific bioink that can facilitate the functionalization of the fabricated vascular equivalents. These achievements might be useful for a wide range of biomedical applications, from modeling blood vessel relevant diseases to building vascularized tissues/organs.
Mr. Wonil Han received his bachelor's degree in Life Science from Handong Gl
... weniger
Bibliographische Angaben
- Autoren: Dong-Woo Cho , Byoung Soo Kim , Jinah Jang , Ge Gao , Wonil Han , Narendra K. Singh
- 2020, 1st ed. 2019, XV, 114 Seiten, 53 farbige Abbildungen, Masse: 15,5 x 23,5 cm, Kartoniert (TB), Englisch
- Verlag: Springer, Berlin
- ISBN-10: 3030322246
- ISBN-13: 9783030322243
Sprache:
Englisch
Kommentar zu "3D Bioprinting"
0 Gebrauchte Artikel zu „3D Bioprinting“
| Zustand | Preis | Porto | Zahlung | Verkäufer | Rating |
|---|
Schreiben Sie einen Kommentar zu "3D Bioprinting".
Kommentar verfassen